Emtec Movie Cubes

[stefan Wuttke]

okay, 

Download the
http://www.emtec-international.com/drivers/R700/firmware_r700.zip
Firmware.
Extract the zip file .
Then ectract with dd a tar.bz2 part of the install.img :

dd if=install.img of=install_0x642bfe.tar.bz2 bs=1 skip=6564862 
 

I think there is enough GPL Software to find!

Am Montag, den 20.10.2008, 16:09 -0400 schrieb Thomas Charron:
> I'm not the OP, but the manuls located online via the web site have
> no mention of the GPL.
> 
> http://www.emtec-international.com/PDF/manuels/R700/R700_manual_EN.pdf
> 
> On Mon, Oct 20, 2008 at 3:27 PM, Chris DiBona <cdibona at gmail.com> wrote:
> > Hi Hub;
> > Did the documentation contain an offer to provide the source code?
> > Chris
> >
> > On Mon, Oct 20, 2008 at 11:57 AM, Hubert Figuiere <hub at figuiere.net> wrote:
> >>
> >> On Mon, 2008-10-20 at 14:10 -0400, Thomas Charron wrote:
> >> > Well, for one thing, it sure as hell is running Linux considering
> >> > there's an ext3 file system in there, just from first glance.
> >>
> >> That's not a proof.
> >>
> >> But using "strings" on one of the "install.img" file of the r700
> >> firmware show the following:
> >>
> >> Linux version 2.6.12.6-VENUS (parden at realtek) (gcc version 3.4.4
> >> mipssde-6.02.03-20050629) #2 Sat Apr 12 12:50:32 CST 2008
> >>
> >>
> >> Hub
> >>
> >>
> >
> >
> >
> > --
> > Open Source Programs Manager, Google Inc.
> > Google's Open Source program can be found at http://code.google.com
> > Personal Weblog: http://dibona.com
> >
> 
> 
>