Still no replies from TELSEY (.it AND .com)

[Zibri]

This email is just to inform you all that TELSEY did not reply to any
further emails from me about releasing the source codes...

For who among you who didn't follow the story, TELSEY is using GPLed
software in almost all their products...

TELSEY "MAGIC" for example is a BROADCOM (brcm 96348) based ADSL2+ wifi
router that uses LINUX as operating system,

Here is the output coming from the internal TTL serial port:

 Booting from latest image (0xc0000000) ...
Code Address: 0x80010000, Entry Address: 0x80199018
Decompression OK!
Entry at 0x80199018
Closing network.
Starting program at 0x80199018
Linux version 2.6.8.1 (carpao at Carpao_lab) (gcc version 3.4.2) #1 Wed Dec 21
12:40:40 CET 2005
Parallel flash device: name MX29LV640T, id 0x22c9, size 8192KB
Total Flash size: 8192K with 135 sectors
MAGIC prom init
CPU revision is: 00029107
Determined physical RAM map:
 memory: 00fa0000 @ 00000000 (usable)
On node 0 totalpages: 4000
  DMA zone: 4000 pages, LIFO batch:1
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd
brcm mips: enabling icache and dcache...
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB 2-way, linesize 16 bytes.
PID hash table entries: 64 (order 6: 512 bytes)
Using 128.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 14044k/16000k available (1364k kernel code, 1936k reserved, 204k
data, 72k init, 0k highmem)
Calibrating delay loop... 254.77 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction...  unavailable.
NET: Registered protocol family 16
Can't analyze prologue code at 80163844
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
bcm963xx_mtd: rootfs_addr = 0xBF800100, kernel_addr = 0xBFAAE100
brcmboard: brcm_board_init entry
Confirm button interrupt has been configured
bcm963xx_serial driver v2.0
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
NET: Registered protocol family 1
NET: Registered protocol family 17
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
All bugs added by David S. Miller <davem at redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 72k freed
init started:  BusyBox v1.00 (2005.12.21-11:46+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5


BusyBox v1.00 (2005.12.21-11:46+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.


Loading drivers and kernel modules...

atmapi: module license 'Proprietary' taints kernel.
blaadd: blaa_detect entry
adsl: adsl_init entry
Broadcom BCMPROCFS v1.0 initialized
Broadcom BCM6348A2 Ethernet Network Device v0.3 Dec 21 2005 12:39:20
Config Internal PHY Through MDIO
BCM63xx_ENET: 100 MB Full-Duplex (auto-neg)
eth0: MAC Address: 00:03:6F:13:20:48
Broadcom BCM6348A2 Ethernet Network Device v0.3 Dec 21 2005 12:39:20
Config External PHY Through MDIO
eth0 Link UP.
BCM63xx_ENET: Auto-negotiation timed-out
BCM63xx_ENET: 10 MB Half-Duplex (assumed)
eth1: MAC Address: 00:03:6F:13:20:49
Telsey BCM6348A2 USB Network Device v0.4 Dec 21 2005 12:39:23
usb0: MAC Address: 00 03 6F 13 20 4A
usb0: Host MAC Address: 00 03 6F 13 20 4B
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
wl0: Broadcom BCM4318 802.11 Wireless Controller 3.131.35.0.cpe0.0a
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
Telsey smart card: tda8007_module_init
tda8007: Found TDA 8007BHL/C2
wlctl: wlctl: smartcardmngr:Initializing SmartCardMngr
smartcardmngr:SMART CARD INSERTED