Still no replies from TELSEY (.it AND .com)

[Zibri]

Still no answer from TELSEY nor TELECOM ITALIA.

Are you planning to do something about this issue or not ?



----- Original Message ----- 
From: "Zibri" <zibri at worldonline.it>
To: <legal at lists.gpl-violations.org>
Cc: <rt at gpl-violations.org>
Sent: Wednesday, May 17, 2006 04:35
Subject: Still no replies from TELSEY (.it AND .com)


> This email is just to inform you all that TELSEY did not reply to any 
> further emails from me about releasing the source codes...
>
> For who among you who didn't follow the story, TELSEY is using GPLed 
> software in almost all their products...
>
> TELSEY "MAGIC" for example is a BROADCOM (brcm 96348) based ADSL2+ wifi 
> router that uses LINUX as operating system,
>
> Here is the output coming from the internal TTL serial port:
>
> Booting from latest image (0xc0000000) ...
> Code Address: 0x80010000, Entry Address: 0x80199018
> Decompression OK!
> Entry at 0x80199018
> Closing network.
> Starting program at 0x80199018
> Linux version 2.6.8.1 (carpao at Carpao_lab) (gcc version 3.4.2) #1 Wed Dec 
> 21
> 12:40:40 CET 2005
> Parallel flash device: name MX29LV640T, id 0x22c9, size 8192KB
> Total Flash size: 8192K with 135 sectors
> MAGIC prom init
> CPU revision is: 00029107
> Determined physical RAM map:
> memory: 00fa0000 @ 00000000 (usable)
> On node 0 totalpages: 4000
>  DMA zone: 4000 pages, LIFO batch:1
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
> Built 1 zonelists
> Kernel command line: root=31:0 ro noinitrd
> brcm mips: enabling icache and dcache...
> Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 
> bytes.
> Primary data cache 8kB 2-way, linesize 16 bytes.
> PID hash table entries: 64 (order 6: 512 bytes)
> Using 128.000 MHz high precision timer.
> Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
> Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
> Memory: 14044k/16000k available (1364k kernel code, 1936k reserved, 204k
> data, 72k init, 0k highmem)
> Calibrating delay loop... 254.77 BogoMIPS
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> Checking for 'wait' instruction...  unavailable.
> NET: Registered protocol family 16
> Can't analyze prologue code at 80163844
> PPP generic driver version 2.4.2
> NET: Registered protocol family 24
> Using noop io scheduler
> bcm963xx_mtd driver v1.0
> bcm963xx_mtd: rootfs_addr = 0xBF800100, kernel_addr = 0xBFAAE100
> brcmboard: brcm_board_init entry
> Confirm button interrupt has been configured
> bcm963xx_serial driver v2.0
> NET: Registered protocol family 2
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 512 bind 1024)
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Ebtables v2.0 registered
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> 802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
> All bugs added by David S. Miller <davem at redhat.com>
> VFS: Mounted root (squashfs filesystem) readonly.
> Freeing unused kernel memory: 72k freed
> init started:  BusyBox v1.00 (2005.12.21-11:46+0000) multi-call binary
> Algorithmics/MIPS FPU Emulator v1.5
>
>
> BusyBox v1.00 (2005.12.21-11:46+0000) Built-in shell (msh)
> Enter 'help' for a list of built-in commands.
>
>
> Loading drivers and kernel modules...
>
> atmapi: module license 'Proprietary' taints kernel.
> blaadd: blaa_detect entry
> adsl: adsl_init entry
> Broadcom BCMPROCFS v1.0 initialized
> Broadcom BCM6348A2 Ethernet Network Device v0.3 Dec 21 2005 12:39:20
> Config Internal PHY Through MDIO
> BCM63xx_ENET: 100 MB Full-Duplex (auto-neg)
> eth0: MAC Address: 00:03:6F:13:20:48
> Broadcom BCM6348A2 Ethernet Network Device v0.3 Dec 21 2005 12:39:20
> Config External PHY Through MDIO
> eth0 Link UP.
> BCM63xx_ENET: Auto-negotiation timed-out
> BCM63xx_ENET: 10 MB Half-Duplex (assumed)
> eth1: MAC Address: 00:03:6F:13:20:49
> Telsey BCM6348A2 USB Network Device v0.4 Dec 21 2005 12:39:23
> usb0: MAC Address: 00 03 6F 13 20 4A
> usb0: Host MAC Address: 00 03 6F 13 20 4B
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
> wl0: Broadcom BCM4318 802.11 Wireless Controller 3.131.35.0.cpe0.0a
> dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
> Telsey smart card: tda8007_module_init
> tda8007: Found TDA 8007BHL/C2
> wlctl: wlctl: smartcardmngr:Initializing SmartCardMngr
> smartcardmngr:SMART CARD INSERTED
>
>